DAIKIN PHILIPPINES LOGO

Protecting Your Aircon Parts from Electrical Surges During Thunderstorms

bg

The sky turns grey, thunder rattles the windows, and the lights flicker for a second. Then everything comes back on and you carry on with your evening. A few days later, your aircon won’t start, or it blinks an error code at you. It may not be a coincidence.

Why storms are tough on your aircon parts

Lightning doesn’t have to strike your house. A hit on a nearby pole or transformer can send a sudden spike of voltage through the wiring in your neighborhood. The jolt that comes when power returns after a brownout can be just as rough. Your aircon takes that hit, usually without any warning.

The aircon parts most at risk

  • Control board (PCB). This is the unit’s brain. A surge can burn it out, and you may notice the aircon ignoring the remote, lights blinking, or an error code on the display.
  • Capacitors. These give the fan and compressor motors the push they need to start. Surges weaken them over time, so the unit hums but won’t start, or the fan spins slowly.
  • Compressor. This is the heart of your aircon and its most expensive part. Repeated spikes, or switching on again too quickly after a power cut, can wear it down.

Replacing a compressor can cost a big part of what a new unit does. That is why prevention is worth the small effort.

What you can do at home

  1. Switch off at the breaker when a thunderstorm is close, especially if you’re heading out. Unplug window-type units too.
  2. Use a proper surge protector or AVR rated for your aircon’s wattage. A basic extension cord won’t protect anything. Ask an electrician about a surge protective device at your main panel for whole-house cover.
  3. Wait a few minutes after a brownout before turning the aircon back on, and only once the lights are steady.
  4. Book regular maintenance. A technician can tighten loose terminals, test capacitors, and spot a tired board before it fails. Once a year is a good habit, ideally before the rainy months.

 

Built-in protection with Daikin ALL VOLTAGE GUARD (SUPER PCB)

Unstable power is a common problem, and it can hurt in two ways. Overvoltage can seriously damage your unit, while undervoltage can shut your aircon off just when you need it most.

That’s why the D-Smart King Split-Type Inverter, D-Smart Queen Split-Type Inverter, D-Smart Split-Type Inverter and D-Smart Prince Split-Type Inverter all come with the ALL VOLTAGE GUARD (SUPER PCB). Daikin’s outdoor PCBs are specially strengthened to withstand sudden voltage swings from 0 up to 440V, so they keep working even where power isn’t reliable.

Not sure if your aircon is due for a check? Find a Daikin dealer near you and have your unit looked at before the next storm.